Yuri Kazakov

    Publications:

    Kazakov Y., Kornaev A., Shutin D., Kornaeva E., Savin L.
    Abstract
    Despite the fact that the hydrodynamic lubrication is a self-controlled process, the rotor dynamics and energy efficiency in fluid film bearing are often the subject to be improved. We have designed control systems with adaptive PI and DQN-agent based controllers to minimize the rotor oscillations amplitude in a conical fluid film bearing. The design of the bearing allows its axial displacement and thus adjustment of its average clearance. The tests were performed using a simulation model in MATLAB software. The simulation model includes modules of a rigid shaft, a conical bearing, and a control system. The bearing module is based on numerical solution of the generalized Reynolds equation and its nonlinear approximation with fully connected neural networks. The results obtained demonstrate that both the adaptive PI controller and the DQNbased controller reduce the rotor vibrations even when imbalance in the system grows. However, the DQN-based approach provides some additional advantages in the controller designing process as well as in the system performance.
    Keywords: active fluid film bearing, conical bearing, simulation modeling, DQN-agent, adaptive PI controller
    Citation: Kazakov Y., Kornaev A., Shutin D., Kornaeva E., Savin L.,  Reducing Rotor Vibrations in Active Conical Fluid Film Bearings with Controllable Gap, Rus. J. Nonlin. Dyn., 2022, Vol. 18, no. 5, pp.  873-883
    DOI:10.20537/nd221226

    Back to the list